revision 11/17/2011 www.phihong.com 24 port ieee802.3at/poeplus midspan poe806u for 10/100 /1000 base-t networks features ? compliant with the ieee802.3at standard ? full power of 576w?33.6w per port, no power management required ? 2 finger classification ? full protection otp, ocp, ovp ? snmp management option ? ssl available with snmpv3 ? windows gui ? 10/100/1000 base-t compatible ? may power cisco ap1250 using the accy125x dongle ? limited lifetime warranty ? 1u rack mountable (kit ships with unit) applications ? voip phones ? security systems ? access point ? ip cameras safety approvals ? cul/ul ? ce mechanical characteristics ? length: 438mm (17.25in) ? height: 44.5 mm (1.75in) ? width: 228mm (8.98in) ? weight: 3.8kg (8.5lbs) output specifications options: y= n to add snmp phihong is not responsible for any error, and reserves the righ t to make changes without notice. please visit our website at www.phihong.com for the most up-to-date specifications and co ntact information. model number of ports output voltage load output power min. max. POE806U-24AT(y) 24 56v 10ma 600ma 806w max
POE806U-24AT characteristics www.phihong.com input: ac input voltage range 90 to 264vac input frequency 47-63hz input current: 12.0a (rms) maximum for 90vac 10.0a (rms) maximum for 230vac leakage current: 3.5ma maximum @ 264vac 60hz ac inrush current: 30a (rms) maximum for 115vac 60a (rms) maximum for 230vac output: total output power 33.6w per port total power 806w ripple and regulation 100mv maximum efficiency 75% (typical) at maximum load, and 120vac 60hz hold-up time 16ms min. 120vac and maximum load transient o/p voltage protection 60v maximum at switch on and off at any ac line phase turn-on delay time 20 sec maximum at maximum load, and 120vac 60hz, 60hz environmental: temperature operation 0 to +40c non-operation -25 to +65c humidity operation 5 to 90% non-operation 5 to 90% emc en55022 class a, fcc class a with utp cabling en55022 class b, fcc class b with ftp cabling isolation test primary to secondary: 4242vdc for 1 minute primary to ground: 2121vdc for 1 minute secondary to ground: 2121vdc for 1 minute immunity en50082-1 esd: en61000-4-2. level 3 rs: en61000-4-3. level 2 eft: en61000-4-4. level 2 surge: en61000-4-5. level 3 cs: en61000-4-6. level 2 voltage dips en61000-4-11 harmonic: en61000-3-2 class a isolation primary to secondary: 10 ohm 500vdc primary to field ground: 10 ohm 500vdc feature: cisco no extern parts required for legacy devices: voip phones: 7910, 7912, 7940, 7960 access points: 1040, 1140, 1260, 3500 over voltage/current, short circuit protection outputs equipped with short circuit protection and overload protection as per 802.3at specifications the output can be shorted permanently without damage over temperature protection automatic shutdown without damage indicators green led: power detected ?connect? flashing green: ieee802.3af detected ?connect? at 33.6 yellow led: fault detected usb diagnostics port and nic interface usb ?b? port for diagnostics and manual port control windows gui nic interface for remote management via secure ip access input connector ac input iec320 c14 warranty limited lifetime
POE806U-24AT dimension diagram www.phihong.com
|
